- 3-phase inverter with 16.500VA power
- 2 independent MPP trackers
- 4 DC connections
- Efficiency up to 98.4%
- Communication via WLAN / Ethernet & 2G/3G/4G**
- Integrated PID recovery
- AFCI arc detection integrated
- Smart Air Cooling
- Protection class IP66
- Installation via FusionSolarApp
- Free system monitoring with FusionSolar
- RS485 for Smart Power Sensor and Smartlogger
- Connection for ripple control receiver
- DC MBUS communication for Smart Optimizer*
- Integrated AC and DC overvoltage protection TYPE II
HUAWEI SUN2000 -15KTL-M5 – General Data
- Operating temperature range: -25 ~ +60 °C
- Relative operating humidity: 0 % RH~100 % RH
- Operating altitude: 0 – 4,000 m (derating > 2.000 m)
- Cooling: Smart Air Cooling
- Display: LED indicators; integrated WLAN + FusionSolar App
- Communication: RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional), 4G / 3G /
- 2G via Smart Dongle-4G (Optional)
- Weight (incl. mounting bracket): 21 Kg
- Dimensions (incl. mounting bracket): 546 x 460 x 228 mm
- Protection class: IP66
- PID consumption: 5W
HUAWEI SUN2000 -15KTL-M5 – Input DC
- Recommended maximum PV power1: 22,500 Wp
- Max. Input voltage2: 1,100 V
- Operating voltage range3: 200 V ~ 1000 V
- Starting voltage: 200 V
- Rated input voltage: 600 V
- Max. Input current per MPPT: 30 A (two string) / 20 A (single string)
- Max. Short circuit current: 40 A
- Number of MPP trackers: 2
- Max. Number of inputs per MPPT: 4
HUAWEI SUN2000 -15KTL-M5 – Output AC
- Mains connection: three-phase
- Rated power: 15,000 W
- Maximum apparent power: 16,500 VA
- Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac, 239.6 Vac / 415Vac, 3W + N + PE
- AC – Line frequency: 50 Hz / 60 Hz
- Maximum output current: 25.2A/380Vac, 23.9A/400Vac, 23.1A/415Vac
- Adjustable power factor: 0.8 kap. … 0.8 ind.
- Total harmonic distortion (THD): ≤ 3%.
HUAWEI SUN2000 -15KTL-M5 – Efficiency
- Max. Efficiency: 98.4 %
- European efficiency: 98.0 %
HUAWEI SUN2000 -15KTL-M5 – Protection devices
- DC load break switch: Yes
- Islanding detection: Yes
- AC overcurrent protection: Yes
- AC short-circuit protection: Yes
- DC reverse polarity protection: Yes
- AC overvoltage protection: CLASS II
- DC overvoltage protection: TYPE II
- Fault current monitoring: Yes
- Arc detection: Yes
- Inputs ripple control receiver: Yes
- Integrated PID recovery4: Yes
HUAWEI SUN2000 -15KTL-M5 – Module Optimizer
- SUN2000-450W-P, SUN2000-450W-P2, SUN2000-600W-P, SUN2000-1300W-P, SUN2000-1100W-P
HUAWEI SUN2000 -15KTL-M5 – Standards and Safety
- EN/IEC 62109-1, EN/IEC 62109-2
HUAWEI SUN2000 -15KTL-M5 – Power supply conditions
- G99, EN 50549, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, C10/11, ABNT, VFR 2019, UNE 217001, UNE 217002,
RD 244, TOR D4, IEC61727, IEC62116
HUAWEI SUN2000 -15KTL-M5 High Current Version – Notes and Explanations
- The maximum PV input power of the inverter is 40,000 Wp when long strings are designed and fully connected with SUN2000-450W-P current optimizers.
- The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would likely damage the inverter.
- Any DC input voltage above the operating voltage range may cause faulty operation.
- HUAWEI SUN2000 -15KTL-M5 increases the potential between PV and ground to above zero by built-in PID recovery function to recover the degradation of module from PID. Supported module types are: P-type (mono, poly)
Click here for the datasheet
HUAWEI SUN2000-15KTL-M5 Inverter
Brands | Huawei |
---|---|
Recommended maximum PV power | 22,500 Wp |
Max. Input voltage | 1,100 V |
Operating voltage range | 200 V ~ 1000 V |
There are no reviews yet.